Author Topic: I can't get rear block off.  (Read 394 times)

Big Daddy

  • Hatchling
  • *
  • Posts: 21
I can't get rear block off.
« on: April 21, 2018, 12:22:09 AM »
Tried to remove trigger assembly and sear/firing pin like in video. Removed all 4 pins and front block comes off but rear block stays put. I used small screw driver to pry it up but would not budge. afraid to really torque it up. don't want to break it. any tips? Brand new DB9.

Chris

  • Western Diamondback
  • *****
  • Posts: 1046
  • Raleigh, NC, USA
Re: I can't get rear block off.
« Reply #1 on: April 21, 2018, 07:10:09 AM »
Tried to remove trigger assembly and sear/firing pin like in video. Removed all 4 pins and front block comes off but rear block stays put. I used small screw driver to pry it up but would not budge. afraid to really torque it up. don't want to break it. any tips? Brand new DB9.

Unless DB changed the design back there, the only thing holding it in is the pin.

IMG_3830.JPGI can't get rear block off.
* IMG_3830.JPG (52.11 kB . 700x596 - viewed 163 times)

DB

  • Red Diamond
  • ****
  • Posts: 106
Re: I can't get rear block off.
« Reply #2 on: April 23, 2018, 01:41:07 PM »
Flip the slide around backwards, slide the slide just on the rear rail and lift up; It should come out.

Big Daddy

  • Hatchling
  • *
  • Posts: 21
Re: I can't get rear block off.
« Reply #3 on: April 23, 2018, 05:08:52 PM »
Thanks DB, That did the trick.

Chris

  • Western Diamondback
  • *****
  • Posts: 1046
  • Raleigh, NC, USA
Re: I can't get rear block off.
« Reply #4 on: April 23, 2018, 07:21:51 PM »
Flip the slide around backwards, slide the slide just on the rear rail and lift up; It should come out.

Dang, DB, that was a good suggestion!

 

Diamondback Firearms

__________


Diamondback Firearms

__________