Author Topic: Magazine Spring Question  (Read 328 times)

Bob Gossett

  • Hatchling
  • *
  • Posts: 4
Magazine Spring Question
« on: July 10, 2019, 10:37:21 AM »
I have been very pleased with my used Gen. 2 DB380 that I recently purchased. No issues after firing 50 rounds of FMJ an HP’s at the range.  I see that several members of this forum have replaced their original magazine springs with the Wolff Kel-Tec +10 springs mainly due to Failure To Feed problems.  Is there any reason that I should replace my original magazine springs with the Wolff springs even though the original DB springs are feeding my pistol without any issues?  Thanks for any input you are willing to provide!  Safe shooting!

Terminatorret

  • Pygmy Rattler
  • **
  • Posts: 39
Re: Magazine Spring Question
« Reply #1 on: July 10, 2019, 08:09:21 PM »
"If it isn't broke, don't fix it."
I didn't follow my own advice, though. I replaced mine as a "precaution" years ago. I haven't had a FTF since...but I don't recall having problems before I replaced them, either.
Mine is the ZExxxx vintage.
"You may all go to hell, and I will go to Texas."
Davy Crockett
Hero of the Alamo

pecospuppy

  • Western Diamondback
  • *****
  • Posts: 219
  • Old Cowboy
Re: Magazine Spring Question
« Reply #2 on: July 11, 2019, 12:19:41 AM »
I agree.  Wait until you have many more rounds through it and can judge if it will be any improvement.

mr380acp

  • Western Diamondback
  • *****
  • Posts: 558
  • NRA Life Member
Re: Magazine Spring Question
« Reply #3 on: July 11, 2019, 08:06:43 AM »
I never changed any magazine springs at all

 

Diamondback Firearms

__________


Diamondback Firearms

__________


Galloway Precision

__________