Author Topic: Hello all  (Read 738 times)

AWRateliff

  • Hatchling
  • *
  • Posts: 2
Hello all
« on: July 10, 2020, 04:44:22 PM »
I just purchased a Gen 4 DB9.  I am having a problem with the magazine ejector in that the magazine will not eject.
Has any one had that trouble?  If so how was it corrected?
Paladin

Chris

  • Western Diamondback
  • *****
  • Posts: 1379
  • Raleigh, NC, USA
Re: Hello all
« Reply #1 on: July 10, 2020, 05:58:50 PM »
Welcome. I don't have a Gen4, but what's happening to the magazine? It won't self drop?

mr380acp

  • Western Diamondback
  • *****
  • Posts: 650
  • NRA Life Member
Re: Hello all
« Reply #2 on: July 10, 2020, 08:33:44 PM »
Welcome aboard

pecospuppy

  • Western Diamondback
  • *****
  • Posts: 337
  • Old Cowboy
Re: Hello all
« Reply #3 on: July 11, 2020, 01:04:49 AM »
My gen 4 would not eject without pulling it with my fingers.  The problem was the ejector spring was holding the cam that rides on the mag too tightly against the mag.  I was about to try to bend the spring to relieve some of the tension. but I ended up having to return it for a broken ejector pin.  The new gen 4 doesn't have that problem.

You may try to bend the ejector spring slightly so that the cam doesn't push that hard on the mag.

AWRateliff

  • Hatchling
  • *
  • Posts: 2
Re: Magazine ejection
« Reply #4 on: July 15, 2020, 12:36:12 AM »
That is the trouble with my DB9 Thanks for the information

 

Diamondback Firearms

__________