Author Topic: DB380 Gen II Trigger Bar Assist Spring  (Read 268 times)

ZERNEBOG661

  • Hatchling
  • *
  • Posts: 7
DB380 Gen II Trigger Bar Assist Spring
« on: July 27, 2021, 11:25:20 AM »
Has any one been able to find a seller of the #33- TB ASSIST SPRING
Just got a used one turns out it’s missing. Also and help on where it goes or how to install it. Thanks for your time.

mr380acp

  • Western Diamondback
  • *****
  • Posts: 650
  • NRA Life Member
Re: DB380 Gen II Trigger Bar Assist Spring
« Reply #1 on: July 28, 2021, 08:00:43 AM »
Galloway made a kit that came with the 2 return springs and the firing pin spring. I changed them all. Those are some small parts. Feel free to ask me any questions about it

mr380acp

  • Western Diamondback
  • *****
  • Posts: 650
  • NRA Life Member
Re: DB380 Gen II Trigger Bar Assist Spring
« Reply #2 on: July 28, 2021, 05:53:33 PM »
I checked Galloway Precision’s Website...unfortunately the kit is out of stock...nothing on Ebay either....

ZERNEBOG661

  • Hatchling
  • *
  • Posts: 7
Re: DB380 Gen II Trigger Bar Assist Spring
« Reply #3 on: July 29, 2021, 11:55:47 AM »
Thanks, Ya I’m having a tuff time finding a replacement. Any way you can get me a pic of it next to a ruler. Simple pice just need to have the right measurements. Or know anywhere els I might be able to find it.

mr380acp

  • Western Diamondback
  • *****
  • Posts: 650
  • NRA Life Member
Re: DB380 Gen II Trigger Bar Assist Spring
« Reply #4 on: July 29, 2021, 02:07:17 PM »
I tossed the old springs unfortunately. I tell you what they are really tiny and it was a feat to change them. I think there is a video on YouTube that shows you how to change them. It might be on this forum if you look back a couple of years or so

ZERNEBOG661

  • Hatchling
  • *
  • Posts: 7
Re: DB380 Gen II Trigger Bar Assist Spring
« Reply #5 on: July 29, 2021, 06:00:31 PM »
Ya Iv seen a few videos that show it in passing. It’s just a little L shaped not sure the exact size or where exactly it goes. If you ever open it back up and can get me that pic I’d appreciate it.  Thanks.

mr380acp

  • Western Diamondback
  • *****
  • Posts: 650
  • NRA Life Member
Re: DB380 Gen II Trigger Bar Assist Spring
« Reply #6 on: July 29, 2021, 06:55:05 PM »
Ok so go to page 6 on the DB 380 threads. I started a thread in 2015 “DB 380 recoil springs “ Someone else actually made their own springs. Check it out, hope it helps you

ZERNEBOG661

  • Hatchling
  • *
  • Posts: 7
Re: DB380 Gen II Trigger Bar Assist Spring
« Reply #7 on: July 30, 2021, 03:06:22 AM »
Great thanks.   I’ll take a look. Let you know how it goes.

mr380acp

  • Western Diamondback
  • *****
  • Posts: 650
  • NRA Life Member
Re: DB380 Gen II Trigger Bar Assist Spring
« Reply #8 on: July 30, 2021, 07:56:39 AM »
It’s easy enough to break it down but putting it back together took me some time

ZERNEBOG661

  • Hatchling
  • *
  • Posts: 7
Re: DB380 Gen II Trigger Bar Assist Spring
« Reply #9 on: July 30, 2021, 06:18:21 PM »
Iv taken it apart many times and understand how it works. But that spring is we’re im stomp lol.  Still can’t find your post tho.

ZERNEBOG661

  • Hatchling
  • *
  • Posts: 7
Re: DB380 Gen II Trigger Bar Assist Spring
« Reply #10 on: August 21, 2021, 02:21:43 AM »
So I made my own trigger asset spring bu I’m at a total lost. I don’t see anywhere it would go.   Also I noticed that I’m not sure if the right terminology but the gun doesn’t cock I pull the slide back but I don’t hear that clicking sound and if I pull the trigger I don’t hear anything either. Does anybody know where I can get a decent video on disassembling the lower I think I’m doing something wrong but I have nothing to compare to.

 

Diamondback Firearms

__________